Forklift Battery Chargers

• Fully integrated microprocessor control for automatic dv/dt di/dt termination
• Interface jack for remote control and monitoring options
• Automatic refresh charge every twelve hours
• Charge time of eight hours or less on a normally discharged battery
• Auto start with five second delay
• Selectable delayed start from one to nine hours
• Battery protection with override timers, wrong battery sensing and negative charge slope termination

Automatic shutdown for the following conditions

• 80% charge does not occur in nine hours or;
• Final charge is not reached six hours after 80% (gassing point)
• Volts per cell are too high or too low
• Charging current is too low
• Battery cable is disconnected while charging

Automatic shutdown for the following conditions

• 80% charge does not occur in nine hours or;
• Final charge is not reached six hours after 80% (gassing point)
• Volts per cell are too high or too low
• Charging current is too low
• Battery cable is disconnected while charging

• Ferroresonant tapered charge for optimum battery and charger life
• Selectable 80% voltage of 2.37 or 2.45 volts

Four position digital display for showing;

• Charge current
• Equalize in process
• Fault diagnostics

Four LED indicators showing charge status including:

• Charging
• 80% Charged
• Charge Complete
• Fault Shutdown
• Red push button for manual shutdown
• Manual jump start for over-discharged batteries
• Manual and or Automatic equalization
• Ten foot long output cables for added flexibility
• Numerous Output connectors available as standard

Product Safety

• UL Listed
• UL Listed to Canadian Safety Standards

Optional Features

• Wall Mount brackets available
• Remote Control Box available
• Fungus protection available

.